[Howto] Changing the expiry date of GPG keys

920839987_135ba34fff
GnuPG keys can have an expiry date. When the key expires, it cannot be used to encrypt data anymore, and thus is a good way to enforce security measures. However, what most people does not seem to know is that this expiry date can be changed quite easily.

Setting an expiry date for a GPG key is usually a good thing: it makes sure that even if you forget the password and do not have a revocation certificate the key will not be valid at some point in the future. Additionally it might force users to replace keys ever so often to enforce specific security measures. Last but not least it forces the key owner to think about his or her own GPG infrastructure and if changes are needed.

Still, there might be times where it makes sense to change the expiry date – if only because you realized that your GPG keys are all fine.

First, you need to know the key ID, in this example ABCDEF12:

$ gpg --list-keys liquidat@example.com
pub   2048R/ABCDEF12 2012-09-10 [expires: 2032-09-10]
uid                  liquidat <liquidat@example.com>
sub   2048R/BCDEF123 2012-09-10 [expires: 2032-09-10]]

With that ID at hand you can now edit the key:

gpg --edit-key ABCDEF12
gpg (GnuPG) 1.4.12; Copyright (C) 2012 Free Software Foundation, Inc.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.

Secret key is available.

pub  2048R/ABCDEF12  created: 2012-09-10  expires: 2013-09-10  usage: SC  
                     trust: ultimate      validity: ultimate
sub  2048R/BCDEF123  created: 2012-09-10  expires: 2013-09-10  usage: E   
[ultimate] (1). liquidat <liquidat@example.com>

gpg>

As you see this key is going to expire in fall 2013. The gpg> indicates a prompt, so you are basically at a gpg specific shell. So, let’s actually change the expiry date:

gpg> expire
Changing expiration time for the primary key.
Please specify how long the key should be valid.
         0 = key does not expire
      <n>  = key expires in n days
      <n>w = key expires in n weeks
      <n>m = key expires in n months
      <n>y = key expires in n years
Key is valid for? (0) 3y
Key expires at Fri May  6 15:45:42 2016 CEST
Is this correct? (y/N) y

You need a passphrase to unlock the secret key for
user: "liquidat <liquidat@example.com>"
2048-bit RSA key, ID ABCDEF12, created 2012-09-10

The passphrase is usually queried by standard means, so on a desktop systems a pop up windows should come up asking you for the passphrase.

Afterwards, list the key again to check the new expiry date:

gpg> list
pub  2048R/ABCDEF12  created: 2012-09-10  expires: 2016-09-10  usage: SC  
                     trust: ultimate      validity: ultimate
sub  2048R/BCDEF123  created: 2012-09-10  expires: 2013-09-10  usage: E   
[ultimate] (1). liquidat <liquidat@example.com>

gpg>

As you see, the expiry date has only changed for the first key, but not for the pub key. The edit procedure is always for one key only. Thus, change the focus from the first key, called “key 0”, to the sub key, “key 1”. A star sign * will indicate the focus on the subkey:

gpg> key 1
pub  2048R/ABCDEF12  created: 2012-09-10  expires: 2016-09-10  usage: SC  
                     trust: ultimate      validity: ultimate
sub*  2048R/BCDEF123  created: 2012-09-10  expires: 2013-09-10  usage: E   
[ultimate] (1). liquidat <liquidat@example.com>

gpg> expire

Changing expiration time for a subkey.
Please specify how long the key should be valid.
         0 = key does not expire
      <n>  = key expires in n days
      <n>w = key expires in n weeks
      <n>m = key expires in n months
      <n>y = key expires in n years
Key is valid for? (0) 3y
Key expires at Fri May  6 15:45:42 2016 CEST
Is this correct? (y/N) y

You need a passphrase to unlock the secret key for
user: "liquidat <liquidat@example.com>"
2048-bit RSA key, ID BCDEF123, created 2012-09-10

gpg> list
pub  2048R/ABCDEF12  created: 2012-09-10  expires: 2016-09-10  usage: SC  
                     trust: ultimate      validity: ultimate
sub  2048R/BCDEF123  created: 2012-09-10  expires: 2016-09-10  usage: E   
[ultimate] (1). liquidat <liquidat@example.com>

As you see, you are done, both dates are changed now. The changes finally need to be saved:

gpg> save

And, last but not least, don’t forget to upload the updated public key to the key servers:

$ gpg --keyserver pgp.mit.edu --send-keys ABCDEF12
gpg: sending key ABCDEF12 to hkp server pgp.mit.edu

Short Tip: Changing the original time of a photo at cli level

920839987_135ba34fffSometimes it happens that you take photos with a camera, and realize right in the middle of your session that the time of the camera is totally offset. In such cases: just keep taking photos and make sure that you take a photo of a clock at some point. You can correct the time stamps later on in the shell, even processing multiple images at once.

Afterwards, download the images, check the actual time offset by comparing the photographed clock and the time and date given in that image, and use exiftool to correct the time stamps of the photo. For example, imagine you have to change the time by adding two hours and fifteen minutes, the cli command is:

$ exiftool -AllDates-='2:15' *.JPG

You can check the actual date of the image either by the usual GUI programs or on command line:

$ exiftool MyImage.jpg|grep Time
File Modification Date/Time     : 2011:11:03 13:00:39+01:00
Exposure Time                   : 1/100
Date/Time Original              : 2009:09:05 07:07:49

If you have to process a batch of pictures, you can just wrap a for loop around the command.